The largest Civic Type R club forum

Established in 2002 it brings together people from all over the world to discuss their one love of Type R's.

Here you can brag away boys (and girls)
#3578474
bondyboy wrote:them valve caps wouldn't last 5 minutes round here twice I've caught kids on my drive trying to steal my caps, don't think they've realised they're locking nuts :lol:
Haha classic! Put it this way, I've kept the crap plastic ones as I had the same thoughts!

What have you got that are locking ones?! Didn't know such a thing existed! Aren't they a pain to remove each time?
#3578829
mikeface wrote:+1 on the union badge... I've got one too... makes it look a little smarter [smilie=karls_thumb.gif] .... if though it was built in Swindon!!
Cheers face. Like I said only minor things so far, but for me it's all in the details and the JDM version has a few things I love, which I've now got. Even if it means I'm celebrating my car being from Swindon!
#3598836
Hi all, a small update as I've had a little delivery from Japan... :-D

As I've said previously, I've never been happy with the standard brakes, so thought I'd make some upgrades to give me the option to sling it around a track with confidence when not commuting.

This arrived from Injection Imports today:

Image

APP micro mesh brake lines

Image

I figured if they're good enough for helping stop aeroplanes, they'll probably do a decent job on the EP3!

Project MU Hyper Carbon+ front pads

Image

And perhaps the most important part of the delivery, the free JDM sweets!

Image

I can't rate Matt at Injection Imports highly enough. Not only did he do me a great price on the above, everything was delivered to my door in just over three weeks - from Japan.

I also ordered Spoon Progressive Springs. Unfortunately they have now been discontinued! Matt refunded my money within hours of notifying me - again brilliant service.

Not content with missing out on the springs, I went on the hunt, with everyone being unable to locate a set. Eventually I went to the dark side and contacted Spoon Sports Europe. They also confirmed they were discontinued, but that Spoon Japan were doing a final batch and sending 20 to Europe. Amazingly they negotiated on the price, so I've reserved a set. Just the two month wait now... :scratch:

So this leaves me with just the calipers to sort. I had considered refurbing my OEM ones, but as I've got the above, it's definitely Spoon caliper time! And then that's it. Definitely. No more expenditure. Ever.

Well except these which I picked up off Laughing on here - thanks.
Image

...and TGM to fit everything, but that won't be until the springs arrive and they've given me a good price to fit. [smilie=karls_thumb.gif]
#3630552
So, a pair of these arrived today :-D

Image

Again, massive thanks to Matt at Injection Imports for sorting. Booked in to R-Motion on Friday to get these, Project Mu Pads and APP lines fitted. Should be quite good at stopping then I hope...!

Will post some more pictures once fitted for anyone who cares [smilie=karls_thumb.gif]
#3632039
Hi all. Today was the day I had my Spoon calipers fitted, to replace my seizing OEM ones :-D

I went to R Motion in Usk, South Wales as I had been told good things about Mike there. He runs his own EG Civic race car and specialises in B and K series engine swaps, so really knows his stuff.

The first thing that greeted me was indeed the EG race car
Image

In fact the car park was a sea of Hondas, some just at the beginning of being restored...
Image

...and one in particular that was looking rather well
Image
Image

During my year of lusting after the calipers (I never thought I’d say that about calipers!) I read so much conflicting information about if they fit OEM wheels, how much better than OEM they are and so on, that I’ll give the facts which will hopefully be of use.

• You need spacers to fit behind OEM wheels, I’m using just 3mm and although they’re close, they’re never going to catch
• Part of the dust shield needs to be cut away. In fairness to Spoon this is shown in the instructions (even if they are pretty poor)
• Once the shield is cut, they align perfectly with the disc, with no adjustment required
• Are they better than OEM, well more in a bit.

So I had my pads, lines, calipers and spacers and was feeling pretty well organised, if a little apprehensive that all these imported parts would go together. Mike took one look at the discs and asked if I’d bought these too. Um, no.

In hindsight I should’ve checked these too, but as Honda less than six months ago said they were fine during a service and OEM discs are ace, I didn’t consider changing. So, I was stuck until Mike said he had some used grooved and drilled discs in good condition.

Ideally I’d steer clear of this more extreme style, but knowing I’d only end up driving home, ordering more stuff from Japan, I thought it best to go with it. We agreed I’d swap my knackered OEM calipers for them.

So work began and after some angle grinding, the calipers were on
Image

Then the APP lines went on, with no problems. Mike commented they were some of the best he’d seen. That’s always reassuring.
Image

Lastly, the Project Mu Hyper Carbons. Mike said nothing about these...
Image

And so after bleeding the brakes
Image

I was good to go.
Image

All I can say is the difference is outstanding. I appreciate that just changing discs would’ve made a noticeable improvement, but this setup is amazing! As the car is a daily, I needed town driving to be easy and smooth and that’s exactly what I’ve got. The brakes are clearly improved, but in stop-start traffic on the M4 and back at home they were pretty much the same as before. Stamp on the middle pedal at higher speeds though and it stops like its hit a wall.
Seems an odd thing to say, but the brakes will definitely make my car faster now. Track day soon for sure. Anyway thanks for reading all this and for now here are some quick pictures I took on the iPhone.

Image
Image
Image
Image
Last edited by WelshyWelsh on Sat Jun 01, 2013 10:23 am, edited 1 time in total.
#3632096
Looking good :thumbup: Always loved the look of spoon calipers, just a bit too pricey for my 'cheap' back pocket

Used R motion myself as im just down the road from Cardiff and would always recommend their service as it's knowledgable, reasonable and top notch!
#3632654
Thanks for all the comments guys. Once the Spoon springs arrive I think it'll be spot on.

Funky, I paid about £200 less than Spoon website, but I guess with exchange rates fluctuating its best to contact Matt at Injection Imports direct for best prices. Everything I've bought from him has arrived from Japan within three weeks. [smilie=karls_thumb.gif]
#3632725
WelshyWelsh wrote:Thanks for all the comments guys. Once the Spoon springs arrive I think it'll be spot on.

Funky, I paid about £200 less than Spoon website, but I guess with exchange rates fluctuating its best to contact Matt at Injection Imports direct for best prices. Everything I've bought from him has arrived from Japan within three weeks. [smilie=karls_thumb.gif]
I got my spoon springs from matt when he was at touge iirc, 3 years theyve been fitted and theyve been faultless! Good choice in mods [smilie=karls_thumb.gif]
#3632780
markl wrote:
I got my spoon springs from matt when he was at touge iirc, 3 years theyve been fitted and theyve been faultless! Good choice in mods [smilie=karls_thumb.gif]
Cheers mate. Read so many conflicting things about the springs, but thought I'd take a chance. Plus I'm a sucker for Spoon stuff! Have you had any problems with the change in camber/harder ride etc or are they just all-round better than OEM?
#3632829
Im the same. Spoon calipers, springs exhaust, braces and not forgetting the reservoir socks haha!

Ermm theyre a little harsher than standard but sit at decent ride height (once settled) and iv had numerous comments from experienced drivers and the guy at cog who did the geometry, how well they complimented the oem dampers! No squeeks or bumps and they havnt been touched since fitted.

Although im over due another alignment asap! :sad:
#3632855
markl wrote:Im the same. Spoon calipers, springs exhaust, braces and not forgetting the reservoir socks haha!

Ermm theyre a little harsher than standard but sit at decent ride height (once settled) and iv had numerous comments from experienced drivers and the guy at cog who did the geometry, how well they complimented the oem dampers! No squeeks or bumps and they havnt been touched since fitted.

Although im over due another alignment asap! :sad:
Good taste [smilie=karls_thumb.gif] Can't get over how great the brake setup is now. Yeah the calipers are a bit bling, but they perform so well to match.

Sounds like the springs are going to be great. The big thing was not having squeaks so that's great news! Cheers for the info.
long long title how many chars? lets see 123 ok more? yes 60

We have created lots of YouTube videos just so you can achieve [...]

Another post test yes yes yes or no, maybe ni? :-/

The best flat phpBB theme around. Period. Fine craftmanship and [...]

Do you need a super MOD? Well here it is. chew on this

All you need is right here. Content tag, SEO, listing, Pizza and spaghetti [...]

Lasagna on me this time ok? I got plenty of cash

this should be fantastic. but what about links,images, bbcodes etc etc? [...]