The largest Civic Type R club forum

[Magnificent_one]

Very nice civic dude! Love it

[Kieran_CTR]

Very nice civic dude! Love it

Thank u kindly sir, much appreciated [smilie=karls_thumb.gif]

[Ollie milanoctr]

Did you get round to tackling the rear wiper in the end?

[Kieran_CTR]

Did you get round to tackling the rear wiper in the end?

I had a start on it mate but popped them 2 clips & they just snapped straight away, then couldn't find any more screws to take off is it was on solid & didn't want to break anything else I'm great with doing stuff to my car but that felt like I was going to snap it :scratch: obviously I'm doing something wrong what do u do once u pop them 2 clips off at the top?

[Ollie milanoctr]

Do you mean the 2 clips holding the boot panel on thats underneath the spoiler when the boot is shut?

[Magnificent_one]

Get the dremel out to get the wiper off. Just be careful you don't break your window [smilie=karls_thumb.gif]
You'll need a plug from Honda though.

[Rambo]

hack saw it off. Then get a bung from ebay. About £5 max i think. Il try find the seller i got mine from

[Kieran_CTR]

Do you mean the 2 clips holding the boot panel on thats underneath the spoiler when the boot is shut?

It was these 2 clips matey

[Kieran_CTR]

Get the dremel out to get the wiper off. Just be careful you don't break your window [smilie=karls_thumb.gif]
You'll need a plug from Honda though.

I don't really want to hacksaw it

hack saw it off. Then get a bung from ebay. About £5 max i think. Il try find the seller i got mine from

Please mate that will help as I'll need the bung

[Ollie milanoctr]

You need to remove the thin top trim piece first, then the side trims and finally the boot panel with the handle, as they all hold one another together if you get what i mean. There is a screw hidden inside the handle moulding, once that is undone and the clips are off just give it a pull and it should pop off.

[doug2507]

The ebay bungs are a pile of shite. If you get a group buy sorted for PWJDM ones from the states i'm sure you'd get 10 orders no bother. [smilie=karls_thumb.gif]

And as ollie said, wipers a 20 min job to remove, no hacksaw/dremmel required.

[lennybubble]

The ebay bungs are a pile of shite. If you get a group buy sorted for PWJDM ones from the states i'm sure you'd get 10 orders no bother. [smilie=karls_thumb.gif]

And as ollie said, wipers a 20 min job to remove, no hacksaw/dremmel required.

I would buy one

[Kieran_CTR]

You need to remove the thin top trim piece first, then the side trims and finally the boot panel with the handle, as they all hold one another together if you get what i mean. There is a screw hidden inside the handle moulding, once that is undone and the clips are off just give it a pull and it should pop off.

Thanks for all the help Ollie :bigthumb: I'll be giving it a try next week as my work is off the road for a week so using my ep3 everyday now & need a bung before I try it again but will let u know on my next attempt buddy [smilie=karls_thumb.gif]

[Kieran_CTR]

The ebay bungs are a pile of shite. If you get a group buy sorted for PWJDM ones from the states i'm sure you'd get 10 orders no bother. [smilie=karls_thumb.gif]

And as ollie said, wipers a 20 min job to remove, no hacksaw/dremmel required.

A few people said they are a decent fit?

[Kieran_CTR]

I noticed my spoiler was adjustable which I didn't know so I thought I would see how it looks higher & I love it angled up more

[Ollie milanoctr]

You need to remove the thin top trim piece first, then the side trims and finally the boot panel with the handle, as they all hold one another together if you get what i mean. There is a screw hidden inside the handle moulding, once that is undone and the clips are off just give it a pull and it should pop off.

Thanks for all the help Ollie :bigthumb: I'll be giving it a try next week as my work is off the road for a week so using my ep3 everyday now & need a bung before I try it again but will let u know on my next attempt buddy [smilie=karls_thumb.gif]

No worries mate happy to help! it will tidy the back end up nicely :salut:

[SurreyEP3]

Great car mate and it was enjoyable reading your build thread, have taken some ideas too [smilie=karls_thumb.gif]
where did you get that shift light that's on the steering column housing from?

[Kieran_CTR]

Great car mate and it was enjoyable reading your build thread, have taken some ideas too [smilie=karls_thumb.gif]
where did you get that shift light that's on the steering column housing from?

Many thanks buddy [smilie=karls_thumb.gif] it's been a great journey tbh the shift light came with it mate but if u google DRE shift light for ep3 it should bring something up for it. take all the ideas u want by all means bud, what ideas have u taken

[SurreyEP3]

Diffuser, spoiler, shift light and smoked lights [smilie=karls_thumb.gif] want some TD wheels aswell just need to do other bits first

[J@mes]

Car's just a slut