The largest Civic Type R club forum

Established in 2002 it brings together people from all over the world to discuss their one love of Type R's.

Post your power charts here.
User avatar
By Jayep3
#3821534
Had my car mapped by Romain yesterday. I'm pretty happy with the results.

Image
User avatar
By baddohc
#3821538
You might want to add the build spec?

Intake
Exhaust
Cams
Injectors
Etc Etc
User avatar
By Jayep3
#3821596
Oh yeah sorry the spec is

Rbc
Dc header
Silenced 2.5" b pipe
Teg m
K100
User avatar
By baddohc
#3821602
Good torque figures but there is so much more in this setup!

3" exhaust, Better exhaust manifold, 70mm TB with RBC port matched, Cams
Will be seeing 270ish BHP - 210-215 torque.

What injectors are you using? Got a K24 build due to be done myself soon.
User avatar
By Jayep3
#3821607
Romain said the oem back box was holding it back a bit. I'm just not keen on loud exhausts.

I believe its on the stock injectors
User avatar
By baddohc
#3821628
You may want to go for slightly injectors too, if your happy as it is that's fine but there are ALOT of gains available with this setup. Seems like all the effort and cost to basically get back the least amount of poke!
User avatar
By *nub*
#3821631
yeah exactly, my bolt on K20 makes more than this, except for all the low down torque ofc :P
User avatar
By Jayep3
#3821635
If I was to do anymore to it I would probably just turbo it :cool:

Romain said the k24 rarely makes more power than the k20 it's just a lot nicer with the extra torque.
User avatar
By Lewisgame
#3821678
Issue with the K24 is you lose revs. The peak power here is around 7k whereas on a K20 the peak power is well over 8k depending on set up.

Long time ago I had and Ep3 for 220k kilometers in[…]