- Thu May 05, 2016 6:13 pm
#3855610
I've Got a loud knocking noise coming from the o/s drive shaft over uneven ground at 30-40mph , originally I thought maybe rack slider or inner Cv joint .
Now having changed both a complete new drive shaft and the rack slider I've realised that there's quite a bit of play from the intermediate shaft to the inner cv joint splines .
Obviously I can't justify spending £380 for a new part from Honda , so a second hand one is needed .
So my question to somebody in the know is
Will the intermediate shaft From a newer FN2 fit the ep3 ?
I want a decent shaft and bearing so a newer less mileage one would be the best option
Thanks for looking Phil
Sent from my HTC One_dude using Tapatalk
Added in 30 minutes 57 seconds:
The complete intermediate shaft part numbers for FN2 & EP3 are the same( pfkl602782 ) would like to be 100% sure before I go out and buy one though
Sent from my HTC One_dude using Tapatalk
Now having changed both a complete new drive shaft and the rack slider I've realised that there's quite a bit of play from the intermediate shaft to the inner cv joint splines .
Obviously I can't justify spending £380 for a new part from Honda , so a second hand one is needed .
So my question to somebody in the know is
Will the intermediate shaft From a newer FN2 fit the ep3 ?
I want a decent shaft and bearing so a newer less mileage one would be the best option
Thanks for looking Phil
Sent from my HTC One_dude using Tapatalk
Added in 30 minutes 57 seconds:
The complete intermediate shaft part numbers for FN2 & EP3 are the same( pfkl602782 ) would like to be 100% sure before I go out and buy one though
Sent from my HTC One_dude using Tapatalk