- Sat Sep 17, 2011 3:19 pm
#3087795
Thought I'd tidy this thread up, original remains quoted below but for quick reference I've added the current spec to 1st post and will update if/when I get additions
Engine/Power Mods
Hondata KPro TDi North tuned
RBC Intake
Hondata thermal gasket
GruppeM induction kit
SFS Red intake hose
DC-Sports 4-2-1 Manifold and Exhaust
Skunk2 Composite fuel rail
Clockwise motion drop in sump baffle v3
Brenscivic custom Cam cover
Ultralight carbon fibre plug covers
DC Sports alloy billet battery tie bar
Skunk2 socks
Red Fuse cover
Red TP Earthing Kit
Buddyclub Silver/Black oil cap
Black Tegiwa rocker cover washers and domed nuts
Drivetrain
MFactory 5.417 final drive
Accord CL9 6th gear (0.659 ratio)
Mfactory LSD
Mfactory carbon lined syncros (1st through 6th)
Clockwise lightweight flywheel
Exedy Stage 1 clutch
Suspension
MeisterR ZetaR coilovers
Buddyclub roll center adjusters
JDM rear ARB
DC-Sports rear tie bar
Skunk2 rear lower control arms
Cyberspeed rear camber arms
Ingalls front camber bolts
Superpro bushes all round, castor increase version
Brakes
DBA 4000 front discs
Ferodo DS2500 pads for track
ProjectMu NS+ pads for road
Goodridge braided lines
RBF 600 fluid
Wheels & tyres
OEM dressed with Continental Contisport 5 215/45/17
Buddyclub P1 in white with red strip with Federal RSR 215/45/17
Exterior\Cosmetic
JDM wind deflectors
de-badged rear & typeR from front grill
Rebel motorsport club decals on rear window and front splitter
JDM Matts in summer, cheapo ebay ones for winter
Interior
Bride Gias II Low Max seats on Bride rails (genuine)
Stripped rear, Welsh flag there instead
DC-Sports billet gear knob
Buddy Christ
Ganesha
Yoda bust
Various Opie Oils air fresheners
ukdm stenchtangle
Major thread updates/highlights
DC Sports exhaust failure No 1 http://www.civictype-r.co.uk/forum/view ... 3&start=20
DC Sports failure No 2 http://www.civictype-r.co.uk/forum/view ... 3&start=25
Clockwise motion baffle sump & Federal RSR semi-slick tyres http://www.civictype-r.co.uk/forum/view ... 3&start=32
Photoshoot down teh port http://www.civictype-r.co.uk/forum/view ... 3&start=36
External video showing the sound out on track http://www.civictype-r.co.uk/forum/view ... 3&start=43
Llandow track day with Rebel motor sport club http://www.civictype-r.co.uk/forum/view ... 3&start=53
Bride Gias II Lowmax seats installed http://www.civictype-r.co.uk/forum/view ... 3&start=89
pre-facelift rear lights installed http://www.civictype-r.co.uk/forum/view ... &start=111
MFactory carbon syncro set install @ Grinspeed, followed by Mfactory final drive install with longer 6th http://www.civictype-r.co.uk/forum/view ... &start=123
MFactory Final Drive Failure viewtopic.php?f=39&t=243063&start=192
Engine/Power Mods
Hondata KPro TDi North tuned
RBC Intake
Hondata thermal gasket
GruppeM induction kit
SFS Red intake hose
DC-Sports 4-2-1 Manifold and Exhaust
Skunk2 Composite fuel rail
Clockwise motion drop in sump baffle v3
Brenscivic custom Cam cover
Ultralight carbon fibre plug covers
DC Sports alloy billet battery tie bar
Skunk2 socks
Red Fuse cover
Red TP Earthing Kit
Buddyclub Silver/Black oil cap
Black Tegiwa rocker cover washers and domed nuts
Drivetrain
MFactory 5.417 final drive
Accord CL9 6th gear (0.659 ratio)
Mfactory LSD
Mfactory carbon lined syncros (1st through 6th)
Clockwise lightweight flywheel
Exedy Stage 1 clutch
Suspension
MeisterR ZetaR coilovers
Buddyclub roll center adjusters
JDM rear ARB
DC-Sports rear tie bar
Skunk2 rear lower control arms
Cyberspeed rear camber arms
Ingalls front camber bolts
Superpro bushes all round, castor increase version
Brakes
DBA 4000 front discs
Ferodo DS2500 pads for track
ProjectMu NS+ pads for road
Goodridge braided lines
RBF 600 fluid
Wheels & tyres
OEM dressed with Continental Contisport 5 215/45/17
Buddyclub P1 in white with red strip with Federal RSR 215/45/17
Exterior\Cosmetic
JDM wind deflectors
de-badged rear & typeR from front grill
Rebel motorsport club decals on rear window and front splitter
JDM Matts in summer, cheapo ebay ones for winter
Interior
Bride Gias II Low Max seats on Bride rails (genuine)
Stripped rear, Welsh flag there instead
DC-Sports billet gear knob
Buddy Christ
Ganesha
Yoda bust
Various Opie Oils air fresheners
ukdm stenchtangle
Major thread updates/highlights
DC Sports exhaust failure No 1 http://www.civictype-r.co.uk/forum/view ... 3&start=20
DC Sports failure No 2 http://www.civictype-r.co.uk/forum/view ... 3&start=25
Clockwise motion baffle sump & Federal RSR semi-slick tyres http://www.civictype-r.co.uk/forum/view ... 3&start=32
Photoshoot down teh port http://www.civictype-r.co.uk/forum/view ... 3&start=36
External video showing the sound out on track http://www.civictype-r.co.uk/forum/view ... 3&start=43
Llandow track day with Rebel motor sport club http://www.civictype-r.co.uk/forum/view ... 3&start=53
Bride Gias II Lowmax seats installed http://www.civictype-r.co.uk/forum/view ... 3&start=89
pre-facelift rear lights installed http://www.civictype-r.co.uk/forum/view ... &start=111
MFactory carbon syncro set install @ Grinspeed, followed by Mfactory final drive install with longer 6th http://www.civictype-r.co.uk/forum/view ... &start=123
MFactory Final Drive Failure viewtopic.php?f=39&t=243063&start=192
bondyboy wrote:Despite me having the car for over three years now I've still not done a “build” thread, better late than never . . .
I bought the car in May 2008 from a private seller on here (Clazzer), it was a long 2 hour drive to pick it up but took less getting it back
The previous owner had looked after it well; he had a big file with receipts galore in their own little poly-pockets, how-to guides and advice from forums etc. I was shocked at how much he had spent on it over the years, little did I know the modding addiction that awaited me.
When purchased it had the following spec:-
SUSPENSION
Rear Koni Gas Adjustable Sports Shocks
Front & Rear ABP Motorsport spec sports lowering spring kit
Front Ingalls camber adjuster bolts
Rear Ingalls camber adjustable suspension arms
Front E-TEC wide bar alloy strut brace
Rear Lower DC Sports Billet Tie Bar
ABP Fast Road Geometry Set Up
WHEELS & TYRES
18" TSW Catalunya with 215/35zr18 Yokohama Parada Spec 2's
BRAKES
Front & Rear Goodridge stainless steel areoquip brake hoses
Front Red Stuff Ceramic Pads
Front Tarox G88 40 groove discs
ENGINE/PERFORMANCE
ABP Magnex Stainless steel single box cat back 6x4 Oval tailpipe
K&N Typhoon
Neuspeed short shifter kit
TP Earthing Kit - red
COSMETIC UPGRADES
DC Sports red alloy billet gear knob
DC Sports red alloy billet oil filler cap
Dc Sports alloy billet battery tie bar
Spoon resivour socks
K&N Breather filter
PIAA front wiper blades
PIAA led side light bulbs
Silvatec indicator bulbs front & back
High intensity headlight bulbs
Rear Infinity speakers
JDM Red Mats - New in April 2007
Ultralight Carbon Fibre Plug cover
Ultralight Carbon Fibre Inlet manifold cover
Tints all round
Shortly after getting the car I found rebel motorsport club and went on a drive:-
As you can see it had a fair few mods already and I was well happy with my purchase, I quickly added some cosmetic mods (more later) and after a good clean these are a couple of the photos from its 1st photo shoot:-
The first upgrades were added security (shh it's a secret), JVC stereo, Hertz speakers front & rear and an amp to be able to actually hear the music while driving
I also personalised the interior:-
Poor photography sorry but it shows the little Yoda (that used to contain sweets) I've had on my car dash since the Phantom menace came out in 99 and the Buddy Christ (of Dogma fame) I planted on the dash - as an agnostic atheist I'm hedging my bets there Also in the above pic are the “carbon fibre” JDM door sills
Added a tasteful Wales flag to the rear:-
Clean engine bay:-
New items added are the Spoon Radiator cap, Tenzo-R oil cap as the DC Sports one was pink and didn't fit with all the other reds in the bay (Tenzo-R one doesn't work either)
Spoon JDM sexiness
I removed the CIVIC and Union Jack from the rear, added a CivicType-R.co.uk transfer under the rear wiper and smashed on some JDM Deflectors:-
I stayed quiet on the mods for a while then only changing the brake pads to Ferodo DS2500's.
One of my favourite pictures and bit of road, shame it's not better quality but I think it was taken on the move:-
But it didn't take long for me to start spending again, new Skunk2 rear LCA's for bling purposes (although they are about 30% lighter):
Although initially liked the wheels I soon learnt the error of my ways and added some BuddyClub P1s which were just under 2kg lighter a corner than the TSW's they replaced (they were very kerbed but I figured I'd refurb)
Rebel then hired out this place in a little village called Pontrhydfendigaid, we call it "The Bont"; it's a tarmac rally stage on the side of a farmers hill in deepest darkest west Wales – turned out to be an excellent weekend, the 1st of many
Another Rebel event, this time at Kemble airfield
I then got it in my head that I needed a little extra power and had my sights set on a GruppeM and DC exhaust, but figured I'd might aswell do all the breathing mods together so bought a 2nd hand DC Manifold and exhaust, RBC from America, Tein springs, JDM rear ARB, Energy Engine Mount Inserts, SFS intake hose and a GruppeM from CPL.
Booked her in for 2 an a bit days work at TDi North, while there they sorted my dodgy suspension ( I had koni rear shocks and standard front shocks with ABP springs) they installed oem rear shocks with the Tein springs and gave it their FRSU, plus the obligatory Kpro and tune
I added a bit more engine bling in the form of new Skunk2 socks (black n red), sprayed the fuse cover pearlescent red with a Hondata transfer, removed the bonnet soundproofing to allow space for some more transfers, and save weight of course
Dyno at Tdi:-
I must say that the upgrades made a hell of a difference, finally got some usability when not in VTEC – it was like a whole new car
Whilst out on Halloween some kids must have taken a disliking to the VTEC YO! And decided to egg my car when I was on a dual carriageway (good shot tbh) needless to say the butter like Honda paintwork did not appreciate it:-
I think these were from a set I took after the cars 1st full clay bay, glaze, wax, and sealant session, sorry for the driveway pics – I did take it out for a location shoot but the light was dying
I had a well developed OCD for cleaning the car by now, some of the products I use:-
As you may have noticed the rocker cover was letting the engine bay down, cue a few pm's to brenscivic to spec a custom cover in red fading to black, he fitted at Japfest 2010:-
Naked K20
All done, nice n shiney but the oil cap still didn't work
Had also added some little red arrows by this time, pointing to the tow hooks underneath - I know, I know, pointless but it does add something to the front
Then at rebel motorsport dyno day at GotBoost I had hoped to get a independent reading as Tdi's is know to be a bit generous
Although it didn't work out that way as they failed to get a realistic reading despite trying on two separate occasions
Max bhp 327? I wish
I fancied changing the wheels, I wanted to go down to a 17 inch rim as 18 inch tyres were too expensive and knew that the handling should be improved with OEM size, but I liked the buddyclub style so scoured CTRO for the same ones but smaller. None came up for sale, I'd seen a few go over the months but when I wanted them there were nowhere to be seen – until eventually a set came up in north Wales, they weren't the colour I was after but I would refurb them as I like, but on arrival at the sellers house they were mint so I couldn't do it to them
I never intended to have white wheels, but they've grown on me
The wheels came with 2 Yokohama S306's and 2 Michelin sport tyres, the Michelin were borderline illegal with a lot of melted rubber probably from a track session so had to be changed, put 2 Yokohama parada spec2's on (these were going to be my summer wheels so the paradas dislike of puddles wasn't that important). Haven't got any pics from the time, I spent most of my time cleaning the wheels of all the brake dust the ferodo's would chuck out – I needed a pad with less dust...
These bad boys were not only full of JDM win, but they produced significantly less dust and the bite from cold was massively improved over the Ferodo's. I repainted the callipers and applied type r decals, haven't got a shot of them which is surprising as I spent the entire weekend painting them
I was soon back on the track with Rebel once more, this time Llandow.
Strange wheel combination due to varying weather conditions, I took both sets of wheels as I only had two “wet” tyres in each set. I had also swapped the pads back to the more track orientated Ferodo's, just as well really because on my last session I overdid it a bit and this was captured. . .
The car picked up it's 1st injury when it was violently assaulted by a kid on a bike; the kid came flying down a hill of a side road that joins the road I was travelling; I saw him with a look of terror on his face and I knew he couldn't stop, I broke, came to a stop just as he piled into the rear passenger quarter! Thing is if I hadn't seen him or realised he was in trouble and I continued as normal he would have gone behind and missed me, as it was I couldn't risk him turning the other way and me possibly running him over proper.
I attach my reconstuction of said event rather than try to describe it all:-
You can't see the camber going on there but the road I was on is a small but steep hill, the side road on the angle also slopes down
Results:-
Impact on skirt
Dent and Scratch
Was not happy, it happened on a Friday as I was coming home from work, the planned weekend of car detailing action was off - my heart wasn't in it
A holiday with copies of Japanese Performance and Banzai had re-alightened the modding urge in me and it was not long before I was ordering parts again, this time with handling in mind. Bought a Team Mfactory LSD, Exedy stage one clutch kit, BuddyClub N+ Coil-overs and RCA's, SuperPro Bush set all round with increased caster – not much then
With authentic translation error, reading it with an accent you can see how it would have happened, it's for these sorts of gems that I read motherboard manuals
Luckily for me I had been recommended a Honda specialist Lyn had just discovered that wasn't 150 miles away, it was local at 15 miles woot! No more trips to TDi
Mike and Kris at R-Motion certainly know their Hondas and are happy to talk to you all day long about your car, it was booked in for best part of a week to get all of the above parts fitted.
The gearbox would go to their specialists to have the diff fitted and they would soon have their hands full trying to get all the bushes off a 7 year old car.
** Mike said then had taken pictures during fitting, I must askthem if they still got them and will up if they have
I had the car back just in time for Rebel Llandow round 2, with the clutch suitably worn in it was time to give the mods a test
Again it was like a whole new car, the pull out (and in) of the corners was a revelation, the whole package would see me doing 110 by the time I had to slam on the anchors instead of 100 as it was previously – I also had my goPro by this time and was eager to test it out
[youtube][/youtube]
[youtube][/youtube]
The diff does it's job too well at the end of the 2nd video and catches me out - just as well its out on track, think I hit a cow-pat or two, better than a lampost or a wall
My mods are done for now (still paying for the last lot) and have been enjoying the car out on track with another visit to Llandow and another Rebel weekend at Bont – after 3+ years of ownership it still puts a smile on my face
[youtube][/youtube]
[youtube][/youtube]
Last edited by bondyboy on Tue Sep 19, 2017 10:02 am, edited 38 times in total.