The largest Civic Type R club forum

[Hartlepool jono]

From ep3. Looking to remove so i can get my harness points. Actually do i even need to remove them.. Any hep appreciated guys. Have 6 point harnesses. Going through a harness bar. Back seats are now out. Justunsure of all anchor points??? Thanks

[Hartlepool jono]

Actually it def needs to come off to fit my harness bar anyway

[Hartlepool jono]

Anybody???

[CTR-Asch]

I pried it of with a flathead screwdriver.
You have to pull the sides of the plastic outwards.
If you are carefull it wont break.

[Hartlepool jono]

Which sides? Someone else said press in as if im adjusting height???

[doug2507]

Pretty sure you can get away with leaving the belts in. Trying to remember where i had my belts bolted in on the sides before i removed the belts. I'll go see if there's any pics in my build thread. Failing that i pm me your email address and i'll send a copy of the service manual though. Idiots guide on how to do anything. [smilie=karls_thumb.gif]

EDIT: http://civictype-r.co.uk/forum/viewtopi ... &start=140 scroll down, don't need to remove the belts.

[Hartlepool jono]

Ok Doug great i'll have a look. Did you have 6 point harness fitted without roll cage too

[doug2507]

4 point mate. Rear straps went onto the back bench between the base cushion and seat backs, inside strap bolted in the original belt clip points and if memory serves me right i had the side straps bolted in the belt guide/bar down the bottom.

That gave me the option of using harness or belts as a) not a fan of using harness on a daily and b) could still put passengers in the back

[Hartlepool jono]

Ah ok sensible thinking. Do you know if a 6 point can be used as a 4 point. Also do you use eye bolts or what do you use to attach the harness belts

[doug2507]

Yeah, need to use the eye bolts. Just replace the original bolts with them, plenty of thread to do so.

Yes, just omit the extra two straps. Could probably attach them to the from of the seat runners if threads are the same size....