The largest Civic Type R club forum

Established in 2002 it brings together people from all over the world to discuss their one love of Type R's.

Bhp or Beefy Sounds...
User avatar
By blueboy1971
#3864004
Just got round to having my TODA exhaust fitted today and have noticed an issue. The tailpipe seems to be about half an inch shy of protruding from the rear bumper and the exhaust hangers seem to be at an angle and not hanging straight down. The B pipe seems to be sitting fine if not a little low.

How much gap should there be between the mid pipe and back box where the fire ring doughnut sits? Is it going to cause any problems if I leave it where it is?
User avatar
By karlos_91
#3864009
That will probably be why the exhaust doesn't protrude from rear bumper as it's a jdm system and most of the jdm spec 4-2-1 manifolds are slightly longer. Had the same problem when fitted a spoon cat back on my car... then when I added my toda 4-2-1 header, the back box protruded then.

As for the gap between mid box and back box post up a pic for us to have a gander at to see if it looks normal.

Long time ago I had and Ep3 for 220k kilometers in[…]