Civic Type-R Owners Club & Forum

Noob question but when i bought the car it came with a K & N typhoon. i want to revert to standard...i bought a airbox off ebay bargain £5 now i dont know what other bits i need to fit it, it didnc ome with any pipes hoses etc. i cnt wait to volley the typhoon into the north sea

Lol was it too loud, all u need is the filter, 3 screws that hold it in place in the engine bay and the cold air feed, oh and oil breather pipe

Do you have any pictures of the parts needed or guides on how to do this?

If you have all the oem bits then it's very straight forward to be honest. The air box screws in (3 screws) the pipe from the mani is bolted on and held with a hose clip. Cold air feed is also held on with a hose clip. Air sensor plugs into pipe from mani to air box.

Thats just it I dont have all the bits! I have the airbox and the cold air intake pipe but not the air flow pipe to the throttle body and I am fairly sure that i am missing a little rubber hose aswell unfortunately i have no idea because I can't find a guide for "how to remove your chav induction kit and restore your car to normal". Thanks for the help so far by the way. I will scour the parts for sale forum section and then give it a go when i get the air flow pipe and see what else I am missing when i try to put it all back on!

There was one with all the bits on the for sale section. honda will rape you for all the bits thats the problem. Yeh put what u want in the wanted section somebody might message you.
I can see your dilema, the typhoons are pooh! You could try buying a ITG maxogen as they have good gains and are not so noisey.