- Mon Feb 24, 2003 5:43 pm
#28505
Anyone out there got one of these replacement elements?
If so tell me about it
For £30 im willing to try one i think.
http://www.fuelsaver.com.au/profilter.htm
http://www.fuelsaver.com.au/foam.htm
Should i be concerned by this quote? About the 10 microns? Any idea what the original filter filters?
"By using various thicknesses of finer or coarser foams, our designers can vary the above factors to achieve the optimum for each application. It has shown the small quantities of dust particles smaller than 10 microns have no significant effect on engine wear, so the materials used in our range of filters have been carefully selected to give good air flow capacity, excellent load-up tolerance, and high efficiency whilst avoiding unnecessary extraction. Where high dust flow rates are possible, we tailor the filters to arrest even the slightest dust."
If so tell me about it
For £30 im willing to try one i think.
http://www.fuelsaver.com.au/profilter.htm
http://www.fuelsaver.com.au/foam.htm
Should i be concerned by this quote? About the 10 microns? Any idea what the original filter filters?
"By using various thicknesses of finer or coarser foams, our designers can vary the above factors to achieve the optimum for each application. It has shown the small quantities of dust particles smaller than 10 microns have no significant effect on engine wear, so the materials used in our range of filters have been carefully selected to give good air flow capacity, excellent load-up tolerance, and high efficiency whilst avoiding unnecessary extraction. Where high dust flow rates are possible, we tailor the filters to arrest even the slightest dust."
Impreza STI - 330bhp TEK3'd | Mk4 Ibiza Cupra TDI + CC1 Remap
- By colemauro