Page 1 of 1
evo 5 brembo kit on ep3
Posted: Sat Nov 30, 2013 12:10 am
by decoep3
I am just finishing off a brake conversion on my ep3 .
Evo 5 calipers and discs .looks and size are savage compared to any other brakes .
https://www.dropbox.com/sc/ukr9a3gxbobm10i/vnpVragjsy
As I said I am not finished yet , calipers need painting and different evo wheels going on car .
Im wondering would there be much of an interest in these modifications . Pritty much BOLT ON with spacer and caliper bracket . no welding or mods to carrier etc needed .
Re: evo 5 brembo kit on ep3
Posted: Sat Nov 30, 2013 10:52 am
by Rollerdan
I would deffinatley be interested mate ! One thing thats lacking on my car is the brakes ! How much would cost be ?
Re: evo 5 brembo kit on ep3
Posted: Sat Nov 30, 2013 6:47 pm
by Col R
Sounds good :shouldbeinteresting:
Re: evo 5 brembo kit on ep3
Posted: Sat Nov 30, 2013 7:25 pm
by CrouchyM
Depends how much?
Re: evo 5 brembo kit on ep3
Posted: Sat Nov 30, 2013 9:16 pm
by decoep3
https://www.dropbox.com/s/okjxkiu21du8m ... 423d-V.jpg
https://www.dropbox.com/s/h7hky8pstpw7t ... d905-V.jpg
https://www.dropbox.com/s/l6roaavo5bs8r ... af3c-V.jpg
https://www.dropbox.com/sc/i6l4wbs1n3he2ds/AghNxapuaz
I am nearly finished my car and everything has been fitted .
The spacers require wheel studs and bolt directly to the standard hub .
studs wont be supplied with spacers and can be got from honda or extended ones from tegiwa . Then nuts to bolt spacer to your hub as seen in photos .
The spacers sit behind the disc and to use evo brakes you will require aftermarket wheels . Recommend evo 5 as seen in photo
Id say €400
Re: evo 5 brembo kit on ep3
Posted: Sat Nov 30, 2013 9:32 pm
by FunkyRemix
:shouldbeinteresting:
Re: evo 5 brembo kit on ep3
Posted: Sat Nov 30, 2013 11:28 pm
by jonezy
That £400 worth of brackets and spacers or was that how much it all cost you
Re: evo 5 brembo kit on ep3
Posted: Sun Dec 01, 2013 1:37 am
by CrouchyM
Be good if you supplied everything ready to bolt on without sourcing bits from elsewhere.
Re: evo 5 brembo kit on ep3
Posted: Sun Dec 01, 2013 8:26 am
by decoep3
Brackets and spacers work out €400 euro . Im in ireland .
If I was to supply with studs in spacers average price for 10 studs is about 60 euro or more from honda .
then require hub centric wheel nuts to hold spacer on (or what I did was thread locked and put wheel nuts on . Then angle grind off top flush so disc can sit on )nuts where €35 . I think hub centric are more expensive but dont require cutting .
Re: evo 5 brembo kit on ep3
Posted: Sun Dec 01, 2013 8:30 am
by J
Safer to but something tried and tested.
Re: evo 5 brembo kit on ep3
Posted: Sun Dec 01, 2013 10:45 pm
by decoep3
J wrote:Safer to but something tried and tested.
Forgot to mention this setup has been used on a time attack ep3 in Ireland for the last two years with no issues
Re: evo 5 brembo kit on ep3
Posted: Sun Mar 27, 2016 5:59 pm
by cosmic_ep3yo
I know this is an old thread but do u still do these lol
