The largest Civic Type R club forum

Established in 2002 it brings together people from all over the world to discuss their one love of Type R's.

The place for all those routine questions about routine servicing.
User avatar
By AVFC Keith
#3855790
Anyone point me in the right direction..Want to change the plugs on my wife fn2 1.4 civic not type r or type s.

Did my own on my type r no problem,,however the 1.4 engine is totaly different.. the car is a 10 plate.

Any help would be gratefull dont want to give it to a garage unless i have to.


Thanks keith
User avatar
By AVFC Keith
#3855828
Thanks for quick reply loxy.. iv'e seen where there are at the back..
question is what do i need to take apart to reach them? looks very difficult to reach .



Keith
User avatar
By Loxy
#3855829
You'll need to take the weather strip, scuttle panel and metal heat shield from under the windscreen off.

It all clips off with the exception of the heat shield which is bolted.

It's everything you'd need to take off if you were changing the rocker cover on the CTR.

You should be able to get to the plugs then, because you can get all the way to the top exhaust manifold bolts on the K20 that way!

Long time ago I had and Ep3 for 220k kilometers in[…]