The largest Civic Type R club forum

Established in 2002 it brings together people from all over the world to discuss their one love of Type R's.

User avatar
By Lewisgame
#3827356
There's 2 clips at the front of the bench in each side. Pull the bench up on the front and they'll unclip.
Then in the middle of the bench by the drivers side rear seatbelt there's a 10mm bolt. It's a bit tight to get out as you have to push the cushion out the way.
User avatar
By Turkish91
#3827404
Then for the back pieces, if I remember rightly (I should do I only took them out about 4weeks ago!) you pull back the fabric and there is two 12mm bolts that attach to the seat backs, once they are removed there is no fixings on the outer edges of the backs - the panel has a stud which slots into the side of the seat back so you literally just push both backs forward and they pretty much fall out.

Long time ago I had and Ep3 for 220k kilometers in[…]