Page 1 of 2

How do you replace the Washer jet on a EP3?

Posted: Tue Oct 06, 2009 4:00 pm
by neiljones1010
Afternoon guys

is there any chance someone can let me know how to replace the Washer jet on a EP3? one of the little holes has something lodged in it and I have bought a new one to replace it with.

any details would be great

thanks

Re: How do you replace the Washer jet on a EP3?

Posted: Tue Oct 06, 2009 5:50 pm
by mjhamilton
nice easy one

- lift bonnet (hood)
- locate washer jet and remove/disconnect pipe
- 'squeeze' from inside near panel and it will pop out
- make sure you catch and keep the rubber between the panel and jet
- installation is reverse of removal

Of course I assumed it was the front you are replacing

Re: How do you replace the Washer jet on a EP3?

Posted: Wed Oct 07, 2009 8:00 am
by neiljones1010
Thanks for the speedy reply....

I have noticed that there is a nut at the base of the washer jet on my new one so i take it the one im replacing has one as well? do i have to un-screw or is it like you say pop off the pipe and push out the old one?

thanks

Re: How do you replace the Washer jet on a EP3?

Posted: Wed Oct 07, 2009 8:02 am
by mjhamilton
neiljones1010 wrote:Thanks for the speedy reply....

I have noticed that there is a nut at the base of the washer jet on my new one so i take it the one im replacing has one as well? do i have to un-screw or is it like you say pop off the pipe and push out the old one?

thanks
is this an EP3??... no nuts on EP3's.. you got the right parts?

Re: How do you replace the Washer jet on a EP3?

Posted: Wed Oct 07, 2009 10:57 am
by neiljones1010
yeah its a 03 EP3..

I could be mistaken it for a washer spacer..... oppppsss.

Here you go this is the one i bought... http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... 0077922026 im pretty sure its the right part as got it off ebay mind you it only cost me about £1.99

Re: How do you replace the Washer jet on a EP3?

Posted: Thu Oct 08, 2009 3:24 pm
by mjhamilton
best thing to do is take of one of the originals and compare.... the ebay link in now dead but the proper ones are not that expensive from honda and you could upgrade to the jazz ones instead for around £20

Re: How do you replace the Washer jet on a EP3?

Posted: Wed Oct 21, 2009 11:10 am
by neiljones1010
just got a quote from my local Honda dealer for a original washer jet and they quoted me £12...!!! a bit steep dont you think??

Re: How do you replace the Washer jet on a EP3?

Posted: Wed Oct 21, 2009 1:39 pm
by mjhamilton
neiljones1010 wrote:just got a quote from my local Honda dealer for a original washer jet and they quoted me £12...!!! a bit steep dont you think??
like everything from Honda... however at least you know it will fit straight on and work with no issues

Re: How do you replace the Washer jet on a EP3?

Posted: Mon Dec 07, 2009 6:18 pm
by potter
I bought Jazz ones and there cheaper than the civic ones. £20 for Jazz and £25 for civic

Re: How do you replace the Washer jet on a EP3?

Posted: Fri Dec 18, 2009 3:56 pm
by Chimp
i just picked up some jazz ones... fitted straight on like a glove :)

Re: How do you replace the Washer jet on a EP3?

Posted: Thu Jan 07, 2010 6:06 pm
by Ceepee777
Whats the difference between the Jazz and Civic ones, They give a better coverage or something? :scratch:

Re: How do you replace the Washer jet on a EP3?

Posted: Sat Jan 09, 2010 9:25 am
by mjhamilton
Ceepee777 wrote:Whats the difference between the Jazz and Civic ones, They give a better coverage or something? :scratch:
the jazz ones give a nice high powered 'mist' effect which is supposed to be a lot better then the standard civic coverage

Re: How do you replace the Washer jet on a EP3?

Posted: Sat Feb 06, 2010 6:35 pm
by JDVTR1
Does anyone have a part number for the Jazz ones?

Re: How do you replace the Washer jet on a EP3?

Posted: Tue Feb 23, 2010 12:12 pm
by Ceepee777
Jazz Washer Jet Nozzles Part# : 76810SAAE01


Just ordered mine [=

Re: How do you replace the Washer jet on a EP3?

Posted: Tue Feb 23, 2010 12:17 pm
by dandemoraliser
one mod i need to do.....! :bad-words:

Re: How do you replace the Washer jet on a EP3?

Posted: Tue Feb 23, 2010 12:22 pm
by sn:afu
dandemoraliser wrote:one mod i need to do.....! :bad-words:
Its a good mod, as long as you dont really plan on clearing your windscreen on the motorway as I noticed it gets a bit weak the spray :lol:

Re: How do you replace the Washer jet on a EP3?

Posted: Tue Feb 23, 2010 12:24 pm
by Superbully
dandemoraliser wrote:one mod i need to do.....! :bad-words:
c'mon. keep up!

Jazz ones = a fan pattern of spray rather than the direct jets of the civic

Re: How do you replace the Washer jet on a EP3?

Posted: Tue Feb 23, 2010 12:26 pm
by dandemoraliser
sn:afu wrote:
dandemoraliser wrote:one mod i need to do.....! :bad-words:
Its a good mod, as long as you dont really plan on clearing your windscreen on the motorway as I noticed it gets a bit weak the spray :lol:
Better than at 50-70mph my jets shooting straight into my GM scoop! :???:

Re: How do you replace the Washer jet on a EP3?

Posted: Tue Feb 23, 2010 12:34 pm
by sn:afu
dandemoraliser wrote:
sn:afu wrote:
dandemoraliser wrote:one mod i need to do.....! :bad-words:
Its a good mod, as long as you dont really plan on clearing your windscreen on the motorway as I noticed it gets a bit weak the spray :lol:
Better than at 50-70mph my jets shooting straight into my GM scoop! :???:
Its a new mod, have you not heard?

Water cooled air induction :lol:

Re: How do you replace the Washer jet on a EP3?

Posted: Mon Aug 05, 2013 2:44 pm
by dutch
These are a bugger to set :bad-words: