Finally... the button is in place and working!
As promised, here are some pictures of the fitting procedure. I used the
Starter.doc from the 1st post as guide. Hope this pictures can be used as a complement to that document.
Brown plug, where is the thick black/white wire:
Brown plug disconnected, for better view of the black/white wire:
Dash with lower cover removed. Here you can see the wires that connect to the cigarrete lighter:
Wires from the relay already connected to the cigarrete lighter wires (red-yellow/green; black-black); I've cuted the 2 wires and connected them with a connector like the one shown in the picture:
Thick black/white wire already connected with red wire from the relay. This one was hard to connect
... I was trying to connect them as I connected the ones from the cigarrete lighter. But theres no space to handle the wires, so I soldered them together and used a piece of rubber to isolate them:
Place where the relay will stay:
The button in is place... I'm just waiting for Composite Guru's CF surrounding!
Now... I only have to:
- Hot glue the relay in that place shown in the picture
- Try to fix the loose wires so that they don't make any noise with the car moving
Hope this pictures help you guys that want to fit one of these buttons!
Btw... thanks to all of you who helped me, answering to all my questions!