- Fri Apr 28, 2017 2:40 pm
#3864094
Hi there I'm currently overhauling the suspension and steering on my Ep3 Premier
Can any one tell me the standard ride heigh, ground to lip of wheel arch (centred) ?
Geometry setting -1 camber all round with -1mm toe in rear, Front I see toe out of 0.5mm is pretty common on here but is any one running these settings with a 0.5mm toe in at the front?
Anyone used the remanufacutered steering rack and motor by Hirsche
Cheers
Paddy
Can any one tell me the standard ride heigh, ground to lip of wheel arch (centred) ?
Geometry setting -1 camber all round with -1mm toe in rear, Front I see toe out of 0.5mm is pretty common on here but is any one running these settings with a 0.5mm toe in at the front?
Anyone used the remanufacutered steering rack and motor by Hirsche
Cheers
Paddy